|
DME (Engine Control Unit for Gasoline
Motors) Functions include:
Applicable: 3 series (ESO & ESe), 5 series (E28, E34
& E39}, 6 series (E24), 7 series (E32 & E38), 8 series (E31)
DME Fault Code Recall and Reset
DME Module Version, Hardware Number, Software Number, Production
Date, Part Number, etc.
DME Component Activation: Injectors, idle actuator, oxygen sensor
heater relaE A/C compressor relay, secondary air-pump relay, tank
ventilation relay and kick-down prevention solenoid valve, etc.
DDE (Diesel Engine Control Unit) Functions
Applicable: 1992-1995 525td (E34), 1990-1995 525 tds (E34),
1992-1996 525tds Touring (E34), 1991-1998 325td (E36) & 1993-1998
325tds (E36)
DDE Fault Code Recall and Reset
DDE Module Version, Hardware Number, Software Numben Production Date,
Part Number, etc.
DDE Component Activation
EML (Electronic Throttle Control)
Functions
Applicable: 6 and 12 cylinder models with EML
EML Fault Code Recall & Reset
EML Module Version
EGS (Electronic Automatic Transmission)
Functions
Applicable: 3 series (E36), 5 series (E34 & E39), 7 series (E32
& E38), and 8 series (E31)
EQS Fault Code Recall & Reset
EQS Module Version
EGS Component Activation: Shift solenoid valves, converter lockup
clutch solenoid, P/N lock solenoid, pressure regulator, program
indicator and other vital components. The Retriever allows the
technician to disconnect, connect or pulse each component to assist in
proper diagnosis.
SRS Functions
Applicable: 3 series (E36), 5 series (E34 & E39), 7
series (ESS & ESS), 8 series (ESI)
SRS Fault Code Recall & Reset
SRS Module Version
Oil & Service Inspection Light
Functions
Applicable: All BMW's with large diagnostic socket
Oil Service Light Reset
Inspection Light Reset
The Oil Service and Inspection Reset function is a single touch
response button and does not require being held down for a prolonged
time to complete the reset cycle.
|